Skip to content
AIDA

01Solutions

Three suites for three fields of work – and AIDA Complete for organisations that need all ten modules. Each suite is a section of the same platform.

02 · Architecture & Construction

ConstructionSuite

For construction projects where permits, quantities, claims and safety have to fit together.

What your team gets done with it

  • Prepare permit procedures completely and keep deadlines
  • Give notice of changes in time and build claims with evidence
  • Check invoices against the bill of quantities and measurements
  • Document inspections, hazards and briefings on site

Modules in the suite

Typical workflows

Examples from the demo environment · fictional data

  • One construction project, one workspace

    PermitFlowQuantityCheckSiteSafe

    Extension of a production hall: one mandatory document is missing for the operating permit, and the deadline for supplying it ends in nine days. The shell contractor's third interim invoice shows four discrepancies. A high-severity safety hazard has been overdue for two days. All three sit in the same project.

  • From site diary to claim

    BauClaim

    New logistics centre as general contractor: the site diary records differing ground conditions, a revised reinforcement drawing and a standstill. AIDA flags the entries by rule as possible change events and computes the notice deadline from the contract.

Who works with it

Role templates of the application

Project Manager
Runs construction projects: claims, permits, invoicing, safety.
Engineer
Works on assigned projects and modules.
Safety Manager
Owns inspections, hazards, briefings and incidents.
Finance Reviewer
Reviews and approves invoices and claims.
External Contractor
Sees assigned projects only; reports hazards and works on own tasks.

03 · Industrial Intelligence

IndustrialSuite

For plants where quality, traceability, maintenance, energy and instruments concern the same components, batches and equipment.

What your team gets done with it

  • Take non-conformances through to an effective action
  • Narrow down affected batches and serial numbers
  • See failures, maintenance and spare parts of a piece of equipment together
  • Spot load peaks and keep instruments valid

Modules in the suite

Typical workflows

Examples from the demo environment · fictional data

  • Quality case, batch, instrument

    QualityNCRRecallTraceCalibrationTrack

    Three quality cases involve the same bearing housing. Two name the same purchased batch; the trace shows two confirmed uses and one possible link without evidence. One of the inspections used an instrument whose calibration was overdue – the case can only be closed after the inspection is repeated.

  • Failure and load profile

    MaintenancePartsEnergyPeak

    A hydraulic press fails three times in 60 days with the same failure mode. In the nights that follow, the press line keeps running at a clearly higher load than in the reference profile. The meter's anomaly appears with the equipment, and the open work order is waiting for a spare part below minimum stock.

Who works with it

Role templates of the application

Quality Manager
Owns quality cases, traceability, instruments and standards.
Maintenance Manager
Owns equipment, maintenance, spare parts and energy.
Engineer
Works on assigned projects and modules.
Read-Only Auditor
Read access to all modules and the audit log.

04 · Standards & Compliance

ComplianceSuite

For organisations that want to work through the consequences of changes to standards in a traceable way, not merely note them.

What your team gets done with it

  • Keep a standards register linked to projects and sites
  • Assess changes and derive what is affected
  • Track actions with owners and due dates

Modules in the suite

Typical workflows

Examples from the demo environment · fictional data

  • One new edition, two affected projects

    NormDeltaPermitFlowQualityNCR

    A new edition of an assigned standard is published; its impact is rated high. Two construction projects the standard is assigned to come up for review. Three actions have been created, one of them overdue.

Who works with it

Role templates of the application

Quality Manager
Owns quality cases, traceability, instruments and standards.
Project Manager
Runs construction projects: claims, permits, invoicing, safety.
Read-Only Auditor
Read access to all modules and the audit log.

05 · All suites

AIDA
Complete

All 10 modules on one data model. Only together do they produce the workflows that cross module boundaries.

List price €1,890 per month in addition to the base price of AIDA Professional, excl. VAT. AIDA Complete is included in AIDA Enterprise.

Compare in the price calculator

Five workflows across module boundaries

  1. QualityNCRRecallTraceCalibrationTrack

    A quality case shows the affected components and batches – and whether the instrument was validly calibrated at the time of inspection.

  2. MaintenancePartsEnergyPeak

    Anomalies in a meter's load profile appear in the record of the equipment it belongs to.

  3. PermitFlowQuantityCheckSiteSafe

    A construction project keeps permits, quantity checks and safety records in one project workspace.

  4. BauClaim

    Site diary, drawing revisions and contract evidence a claim; AIDA flags possible change events by rule.

  5. NormDeltaPermitFlowQualityNCR

    A change to a standard shows which projects and sites it affects and creates the follow-up actions.

See AIDAat Work

We set up the modules that fit your projects and equipment – and support your start along your own questions.